Controlling Algae Growth in Saltwater Aquariums With RowaPhos

Controlling nuisance algae in saltwater aquariums is acontact with the water on a continuous basis, which
common issue for aquarists, beginner andseems to do a more thorough job of removing
experienced alike. To properly control algae, aquariumphosphates. Using media bags will probably work for
owners must consider the specific factors that area lot of people, but for some reason it was just
unique to their aquarium. That being said, one of thecumbersome with the canister filter setup that I am
most common ways to control algae is to reducecurrently using.
phosphates in your system.You will also want to make sure to flush the
Before you look at phosphate reductionRowaPhos before you use it in your aquarium. What
If you are serious about battling algae growth, youdoes that mean? Basically, find some way to run
should consider getting some other common factorspurified water through the media until the rust color
under control as well, such as:thins out. I like to put the RowaPhos in the reactor,
- Attempt to reduce nitrate and ammonia levels inhook up a water pump to the intake, pump about 1
your aquarium further than you currently dogallon of purified water through the fresh media
- Don't run your aquarium light excessivelyinside the reactor, and then attach it to my aquarium
- Clean excessive waste from your aquarium andafter all that. Don't use tap water for flushing, use
filtration system regularlypurified water for best results. I have a video on my
You get the idea. Sometimes, however, it's possibleweb site, linked below, if you want to see the
to get those factors under control as much as youflushing process in action.
possibly can, and you still have nuisance algaeAlso, when it comes to storing or handling RowaPhos,
flourishing in your aquarium.don't let it dry out. When you open a container of
Turning to phosphate controlRowaPhos, it almost looks like wet, used coffee
If you have done everything you can to reduce thegrounds. Your job is to make sure it stays that way,
algae growth, but you're still not happy with thedon't let it dry out.
results, you can turn to something else to try to getPatience
you over that hurdle.Another thing to keep in mind when using RowaPhos
In these cases I would recommend giving RowaPhos,is that patience is key. It won't work overnight. You
and use of a phosphate reactor, a serious look.may need to even use it for a couple months before
I recently dealt with a situation like this with my ownyou start to see phosphate levels drop significantly.
75 gallon saltwater aquarium. I spent hours and hoursIn my situation, I had a tank that was full of
trying to cycle in purified water, changing water morephosphates and silicates for at least a couple years.
often, cleaning hardware more often, upgrading toIt look a long time for RowaPhos to pull all that stuff
better quality lights and carefully controlling myout of my water, substrate and rocks. That is why I
livestock load. Even with all those efforts I stillwould suggest implementing RowaPhos as soon as
couldn't get rid of the diatoms that had plagues myyou are able, and then just use it continuously.
aquarium for quite some time.Replacement of the RowaPhos in your reactor should
The secret ingredient that I found to be extremelytake place every couple of months. At first you may
helpful, when I did finally decide to use it, waswant to replace the media on a more frequent basis
RowaPhos. Phosphate reduction media wasn't theif your phosphate levels are abnormally high. If you
sole solution to my problems. I'm conviced themeasure and monitor phosphate levels regularly, it
RowaPhos wouldn't have worked as well if I didn'twon't take long to get a feel for how often you
have excellent maintenance practices to start with,need to replace your media.
but it was the secret ingredient that put me overBuy in bulk
the top.When buying RowaPhos, buy a big container. I ended
Why did the implementation of RowaPhos work soup paying more in the long run by buying small
well? It removes phosphates and silicates from thecontainers each time. I should have bought a big
aquarium water, and doesn't leach anything back intocontainer right away, it would have cost more up
the water. Of the various phosphate removal mediafront but would have saved money over a year or
that I've tried, RowaPhos is the one that made atwo.
strong impact on the amount of nuisance algae in myStick it out
aquarium.If you decide to use RowaPhos, stick it out and don't
Implementing RowaPhos properlygive up or stop after a few weeks. Keep it going for
What did I learn about implementing RowaPhos intoa good period of time, several months, and you
my aquarium setup?should have good results. Also - and this is important
I found that using a reactor worked much better for- don't neglect your other aquarium maintenance
me than using media bags in my canister filter. I triedduties and practices just because you are using
going the media bag route, but the RowaPhos wasRowaPhos! Keep your normal maintenance routine
almost too fine-grained for my media bags. Using agoing, and use RowaPhos to add that extra polish to
fluidized reactor keeps the RowaPhos in betteryour water.